Filter
Top Products
Chapter 1 Introduction
7
15. Reconfigure the system with the Setup and NetRAID utilities, using the
configuration details you saved in step 2.
16. Verify that the system is restored to its operating configuration.
NOTE This procedure assumes that you are not performing other
procedures, such as installing new PCI cards, tape drives, or
other hardware, or performing operating system upgrades, at
this time. You can do these operations while performing the LH
3 to LH 4 upgrade, but minimizing changes makes
troubleshooting much easier if problems or incompatibilities
arise during the upgrade process.
Verifying Contents
The contents of the shipping box include:
• A new LH 4 CPU baseboard, containing two processor terminator cards,
four Voltage Regulator Modules (VRMs), and two memory boards
• Two Intel Pentium II
Xeon
processors
• Four 64 MB EDO RAM DIMMs (one set of DIMMs)
• LH 4 nameplates for the pedestal and rack configurations
• Two chassis reinforcement bars
• A Technical Reference Card (which fits into an envelope inside the chassis)
• An HP NetServer Navigator CD-ROM and an accompanying flexible disk
• A Torx
T-15 driver for loosening screws
• This manual
Recycling the LH 3/LH 3r CPU Baseboard
Dispose of the LH 3/LH 3r CPU baseboard by shipping it to Hewlett-Packard in
the provided box.