Filter
Top Products
Chapter 3 Installing LH 4 Components
19
Installing Memory
CAUTION Memory comes in packages of four DIMMs. Do not install all
four DIMMs into one board. Proper interleaving requires
memory in each board, bank by bank, in pairs.
1. Unfasten the captive screw on the right side of the memory cage cover, as
shown in Figure 3-4, and lift it upward and away from the memory cage.
Figure 3-4. Opening the Memory Card Cage
2. Remove the two memory boards from the slots in the memory cage. Lift the
ejection levers away from the board to back the board out of its slot, then
lift the board free from the cage, as shown in Figure 3-5.