Filter
Top Products
Removal and Replacement Procedures
Maintenance and Service Guide 5–15
3. Before disconnecting the antenna cables, make note of which
cable is attached to which antenna clip on the Mini Card
module, and then disconnect the auxiliary and main 1
antenna cables from the Mini Card module.
4. Slide the Mini Card retainer bar 2 away from the Mini Card
module. (The edge of the module opposite the socket rises
away from the computer.)
5. Remove the Mini Card module by pulling the card away from
the socket at an angle 3.
✎
The Mini Card module is designed with a notch 4 to prevent
incorrect installation.
Removing a Mini Card module
Reverse the above procedure to install a Mini Card module.