Filter
Top Products
5–6 Maintenance and Service Guide
Removal and Replacement Procedures
5.4 Hard Drive
1. Prepare the computer for disassembly (refer to Section 5.3).
2. Loosen the three black Phillips PM2.5×6.0 screws 1 that
secure the hard drive cover to the computer.
3. Lift the rear edge of the hard drive cover 2 and swing it up
and forward and remove it.
✎
The hard drive cover is included in the Miscellaneous
Plastics Kit, spare part number 415692-001.
Removing the Hard Drive Cover
Hard Drive Spare Part Number Information
Hard drives (include frame and connector)
7200 rpm, 100-GB 410197-001 5400 rpm, 120-GB
5400 rpm, 100-GB
5400 rpm, 80-GB
410198-001
407770-001
407847-001