Filter
Top Products
Chapter 4—Load paper or transparency film, or load originals 13
HP PSC 700 Series
• To do this for the current print job, open the document that you want to print. From
the File menu, choose Print, Print Setup, or Page Setup. Make sure that the
selected printer is HP PSC 700 Series, and then click Properties, Options,
Printer Setup, or Printer. The Setup tab appears. From the Paper Type list,
choose the appropriate type, and then click OK.
/RDGRULJLQDOVRQWKHJODVV
You can process any original by placing it on the glass.
1 Lift the lid, and make sure that the glass is clean.
127( Many of the copy features under Creative Copying will not work correctly if the
glass is not clean.
For more information, see “Clean the glass” in the Onscreen Guide.
2 Place the original face down on the glass in the front right corner with the sides of
the originals touching the right and front edges
It is important that the front right corner is used when using the Creative Copy
feature.
If you are copying from a transparency (that is, your original is printed on
transparency film), place a blank piece of paper on top of the transparency.
3 Close the lid.
7RSHGJH
RIRULJLQDO