Filter
Top Products
7 Common Administration Reports Administration
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 341
5 Enter a single circuit card number or multiple circuit card numbers
separated by commas in the
Card: field to limit the display to specific
circuit cards. There is no default value and the Choices menu is not
available. If you specify all in the
Card: field, the display is limited to
messages about voice system circuit cards only.
6 Enter the start time for the message search in the Start Time: field, that
is, the time of the first message to be displayed. For example, entering
02/05 10:00 indicates that you want to search messages that occurred on
February 5 after 10 a.m.
Use the format of MM/DD HH:MM for month, day, hour, and minute. If the
Start Time field is left blank, the beginning of the message log is used.
If you enter today, all entries since the beginning of the current day are
searched.
7 Enter the stop time for the message search in the Stop Time: field, that
is, the time of the last message to be displayed.
Use the format of MM/DD HH:MM for month, day, hour, and minute. If the
Stop Time: field is left blank, the end of the message log is used. If you
enter today, all messages logged up to (but not including) the current day
are displayed.
Note: If nothing is entered in the
Start Time: and Stop Time: fields,
these fields default to 00:00 of the current date. As a result, no
records are displayed in the Message Log Report.