Filter
Top Products
A Summary of Commands spStatus
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 588
Bootcnt is incremented each time the ROM restarts. Only diagnostics
currently alter it in any other way. SPtime is the time in 16 millisecond
increments since the pack started. If spStatus is running in recursive mode,
this value is not changing, and the debugger is not active, the following
warning is generated:
"No Clock! Check TDM master"
This means that either there is no TDM master and hence no TDM interrupts,
or the pack file is stuck at priority level 6 or 7 and so all interrupts are blocked.
In the former situation, check your T1 cards and make sure that one of them
is the TDM master. In the latter case, you have a bug. Use msdb and
examine the pack file. SPusage is the current load factor on the SSP card.
This is the last value of meaning if the pack is an original-style pack. The
remaining information applies only to SSP Executive packs.
Debug ID, spFreeMemory
Debug ID is set to the pid of the UNIX process currently debugging this SP
card. It is used to avoid collisions between people attempting to debug code
running on a card. spFreeMemory is the amount of memory free in the
memory allocation arenas, which are managed by malloc(), realloc(), and
free().
Free Actions
The number of Action structures not currently assigned to a time slot. This
value is initially 50.