Filter
Top Products
Library Operation
SL500 (M852x) Tape Library Installation and User’s Guide—541531-006
3-6
Locate and Remove Cartridge
3. While still holding the door shut, release the robotics park lever.
4. Use the key to lock the door. The robotics lever automatically moves to the right
when the door locking lever retracts.
Locate and Remove Cartridge
To locate a particular cartridge inside the tape library:
1. Open the door.
2. Locate the particular cartridge by its VOLID (volume ID) label and slot.
3. Remove the cartridge from the slot by sliding the cartridge out.
4. Close the tape library door.
Insert Cartridges Into Slots
Depending on the version and configuration of your tape library, some storage slots
cannot be used.
1. Check the cartridges to make sure they are correctly labeled.
2. Insert as many cartridges into the tape library as you want and as your
configuration allows, making sure you seat them all the way into the storage slots.
Figure 3-4. Moving Robotics Park Lever
Note. You do not have to insert a cartridge into every storage slot. The tape library
automatically audits cartridges and empty slots as part of its initialization routine.
Caution. Inserting the cartridges correctly is critical for library operation. If you do not orient
the cartridges correctly or do not insert them all the way into the storage slots, the tape library
might fail. Make sure you insert the cartridges into the magazine.