Filter
Top Products
SL500 (M852x) Tape Library Installation and User’s Guide—541531-006
4-1
4 Cartridge Information
This section includes:
Handle Cartridges
Improper handling of cartridges can result in loss of data or damage to a tape library
component.
To handle a cartridge correctly:
•
Make sure the leader is latched every time you pick up a cartridge.
•
Keep cartridges clean.
•
Inspect a cartridge before each use, and never put a damaged cartridge into a tape
drive or tape library.
•
Never pull tape from a cartridge.
•
Never open a cartridge.
•
Do not handle tape that is outside the cartridge; the tape edge might be damaged.
•
Do not expose the tape or cartridge to direct sunlight or moisture.
•
Do not expose a recorded cartridge to magnetic fields; this might destroy data on
the tape.
Inspect Cartridges
A defective or dirty cartridge can damage a tape drive. Always inspect a cartridge
before you insert it into a tape drive or a tape library. Look for:
•
Cracked or broken cartridge
•
Broken leader
•
Broken leader latch
•
Damaged write-protect switch
•
Liquid in the cartridge
•
Labels not firmly or neatly attached or extending over the cartridge edge
•
Any other obvious damage
Handle Cartridges 4-1
Inspect Cartridges 4-1
Maintain Cartridges 4-2
Ultrium Cartridges 4-3