HP (Hewlett-Packard) zl Switch User Manual


 
100
Directory management is automatically performed on the InfiniBand system, so do not include path
information for files on the chassis.
1. (Optional) If you are using In-Band Management, configure the ethernet management interface (if
you have not already done so).
2. In the privileged-execute mode, enter the
copy
command with the remote system and path
information.
The “remote system” must be the IP address of the TFTP server.
Syntax:
Example:
3. (Optional) View the images by using the
dir image
command.
4. Continue on to “Activate an Image” on page 100 to install the image.
Activate an Image
After downloading the image file to the chassis controller, it must be installed to become active. The
install
command installs the specified image file into the system.
To install an image file:
1. In the privileged-execute mode, enter install image:name of file
Image files must reside in the image file-system
The file name must have the .
img
extension
All cards must have an oper-status of “Up”
Syntax:
Topspin-270> enable
Topspin-270# config
Topspin-270(config)# interface mgmt-ether
Topspin-270(config-if-mgmt-ethernet)#ip address 10.3.102.8. 255.255.0.0
Topspin-270(config-if-mgmt-ethernet)#gateway 10.3.0.1
Topspin-270(config-if-mgmt-ethernet)#no shutdown
Topspin-270(config-if-mgmt-ethernet)# exit
Topspin-270 (config) # exit
Topspin-270> enable
Topspin-270# copy
tftp
://
<remote-system>/<filepath> <filesystem>:<filename>
Topspin-270#
copy
tftp://@
10.10.20.78/tftp dir/Topspin270-TopspinOS.img
image:Topspin270-TopspinOS-2.0-build397.img
*****************operation completed successfully
Topspin-270#
Topspin-270# dir image
======================================================================
Existing Boot-Images on System
======================================================================
slot date-created size file-name
----------------------------------------------------------------------
1 Mon Aug 11 22:41:19 2003 29830309
Topspin270-TopspinOS-2.0-build397.img
Topspin-360#install image:image-file-name.img