Filter
Top Products
48
7. Use the
show user
command to verify changes.
Displaying User Information
To display the information of configured users:
1. Log in to the CLI as a super user.
Only a user with unrestricted privileges may view user information.
2. Enter the
show user
all command to display current user information.
Topspin-360# show user
=========================================================================
User Information
=========================================================================
username : testuser
password : $1$OHJt61CE$ANK02CcPqKnFoxJ0AKAtB.
snmp-community : secret
permission-level : unrestricted-rw
admin-status : enabled
num-logins : 4
num-unsuccessful-logins : 0
last-login : Mon Nov 17 22:43:25 2003
last-unsuccessful-login :
Topspin-360#
Topspin-90> show user all
=========================================================================
===
User Information
=========================================================================
===
username : admin
password : topspin
snmp-community : justatest
permission-level : ib-rw, ip-ethernet-rw, fc-rw
admin-status : enabled
num-logins : 0
num-unsuccessful-logins : 0
last-login :
last-unsuccessful-login :
…
…
…
username : super
password : super
snmp-community : secret
permission-level : unrestricted-rw
admin-status : enabled
num-logins : 1
num-unsuccessful-logins : 0
last-login : Tue Nov 19 10:03:47 2002
last-unsuccessful-login :
Topspin-90>