Filter
Top Products
ON
LINE/
PAUSE
RIBBON
MEDIA
POWER
using the primary operator panel
2 Operator’
s Guide
Selections from the
main menu
will need to
be changed when changes in the print mode,
media size, options and various other
configuration items are required for the
printer. Instructions begin on
page 23
of this
guide.
note
Refer
to the “Configuring the Printer”
chapter in the
Setup Guide
for complete
instructions in how to access and use the
secondary operator panel.
The following pages describe the status
indicator lights and keys comprising the
primary
operator panel, along with the
related operating modes.
Status Indicator Lights
The three status indicator lights (LEDs)
provide information about current printer
operation, as follows:
• POWER — Lit when the printer is
powered on.
• ON LINE/PAUSE — Lit when the printer is
on line or blinking when the printer is off
line or in a standby/fault state.
• RIBBON MEDIA — Lit when the printer
sensors fail to detect label media or the
presence of a ribbon.
Keys
Three primary operator panel keys provide
for the basic, day-to-day control of the
printer, as described on the following pages.