Filter
Top Products
loading media
12 Operator’
s Guide
17 The
peel-and-present option allows for
on-demand label dispensing. Although
the peel-and-present mechanism is
included with every printer
, the label
present sensor and internal rewind
options are required to use this feature.
To use the optional peel-and-present,
follow the instructions outlined below.
a. Turn off the printer
, and open the
side access cover.
b. Rotate the printhead latch
counterclockwise to raise the
printhead.
c. Lower the hinge plate and the lower
front panel.
d. Using a Philips screwdriver, remove
the tear bar, invert it (flip it over), and
reinstall it.
e. Place the media supply roll on the
media hub assembly
. Slide the
media retainer against the supply
roll, and tighten the thumbscrew.
f. Route the media over the guide
plate, through the media sensor
, and
over the platen roller (located
beneath the printhead).