Filter
Top Products
loading media
7Operator’
s Guide
note
Printers
have been built with two types of
standard media hubs: metal and plastic.
From the diagrams below
, follow the media
loading instructions which match your
printer.
note
Do not use the media retainer if the media
supply roll is wider than 4 inches.
a. If you are using media
with a 3” core, place the
3” media core adapters
on the media hub
assembly.
b. Place the media supply
roll on the media hub
assembly
. Slide the media
retainer against the
supply roll and tighten the
thumb screw.
METAL HUB
a. Place the 3” media
supply roll on the media
hub assembly.
b.
Slide the media
retainer against the
supply roll and tighten the
thumb screw.
PLASTIC HUB
c. Skip the next step and continue with
step 7.