Filter
Top Products
Installing Microsoft Windows Server 2003
Prepare the Installation
Please refer to the Chapter 1 "Preparing the HP Server tc2120 for NOS Installation
tc2120 for your NOS installation" for our recommendations on server preparation,
then gather the following materials:
• HP Server tc2120 Startup CD
• Microsoft Windows Server 2003 CD-ROM
• Up to three blank, formatted 3.5-inch diskettes
• Two or more clients for testing purpose (optional)
NOTE: Disable SCSI Support before using ATA RAID Controller if present. Due to system
resource limitations, the Promise FastTrak100 TX2 IDE RAID controller is not compatible with
systems having SCSI capabilities. (The ATA and SCSI functionality cannot operate
simultaneously). You must disable SCSI support in Setup before you can use the RAID
controller.
To disable SCSI support, follow these steps:
1. Remove any installed SCSI HBA cards from the PCI slots.
2. Install the ATA RAID controller into PCI slot 1 and connect the IDE drives.
3. Turn on the system.
4. Press F10 to enter Setup.
5. Select Boot from the menu.
6. Select Boot Device Priority.
7. Select SCSI Hard Drive and press Enter.
8. Select Promise Fast Track Raid Controller \ HDD 0 and press Enter.
9. Press F6 to Save and Exit. Your system is now ready to use the ATA RAID
controller, but SCSI devices will not be functional.
27
HP CONFIDENTIAL
Writer: Jimmy Chan File Name: 312977-006.doc
Codename: Condor II Part Number: 312977-006 Last Saved On: 9/10/03 10:05 AM