Filter
Top Products
Glossary
Glossary-2
Printer driver
The printer driver makes it possible for you to print data cre-
ated using application software. The printer driver for the
printer is on the Kyocera Mita Software Library CD-ROM
supplied with the printer. Install the printer driver on the
computer connected to the printer.
RAM disk
This is a virtual disk drive that uses part of the printer’s
memory. With RAM disk you can set any memory size arbi-
trarily, and use electronic sorting (to reduce print time).
Simple Network Management Protocol (SNMP)
This is a protocol for the management of networks that use
TCP/IP (Transmission Control Protocol/Internet Protocol).
Sleep mode
This mode is activated after a specified amount of time elaps-
es. The printer goes into economy mode and a minimum
amount of power is consumed. You can change the amount of
time before the printer goes into sleep mode from the printer’s
operator panel. The default setting is 30 minutes.
Status page
This lists printer conditions, such as the printer’s memory,
the total number of copies printed, and paper source settings.