Filter
Top Products
Recovering the configuration settings
This method of recovery requires that you first perform the Save to Removable Media command with
the Computer Setup (F10) Utility before Restore is needed. (See
Save to Removable Media on page 5
in the Computer Setup—File table.)
NOTE: It is recommended that you save any modified workstation configuration settings to a diskette,
a USB flash media device, or a diskette-like device (a storage device set to emulate a diskette drive) and
save the diskette or device for possible future use.
To restore the configuration, insert the diskette, USB flash media device, or other storage media emulating
a diskette with the saved configuration and perform the Restore from Removable Media command
with the Computer Setup (F10) Utility. (See
Restore from Removable Media on page 5 in the Computer
Setup—File table.)
14 Chapter 2 Computer Setup (F10) utility ENWW