Filter
Top Products
Chassis fan
1.
Prepare the workstation for disassembly (
Preparation for disassembly on page 59).
2.
Remove the access panel and rotate the workstation so the system board is parallel to the table to
make it easier to work on (
Access panel on page 61).
3.
Disconnect the power cable that connects the chassis fan to the system board (1).
4.
Remove the four screws from the exterior rear of the chassis that secure the fan (2).
5.
Remove the fan from the chassis.
To install the chassis fan, reverse the removal procedure.
ENWW Chassis fan 83