Filter
Top Products
Travelstar 5K160 (SATA) Hard Disk Drive Specification
112/167
14.24 Read Verify Sector(s) (40h/41h)
Command Block Output Registers Command Block Input Registers
Register 7 6 5 4 3 2 1 0 Register 7 6 5 4 3 2 1 0
Data - - - - - - - - Data - - - - - - - -
Feature - - - - - - - - Error ...See Below...
Sector Count V V V V V V V V Sector Count V V V V V V V V
LBA Low V V V V V V V V LBA Low V V V V V V V V
LBA Mid V V V V V V V V LBA Mid V V V V V V V V
LBA High V V V V V V V V LBA High V V V V V V V V
Device - L - - H H H H Device - - - - H H H H
Command 0 0 1 0 0 0 0 R Status ...See Below...
Error Register Status Register
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
CRC UNC 0 IDN 0 ABT T0N AM
N
BSY RDY DF DSC DRQ COR IDX ERR
0 V 0 V 0 V 0 0 0 V 0 V - 0 0 V
Figure 68 Read Verify Sector(s) Command (40h/41h)
The Read Verify Sector(s) verifies one or more sectors on the device. No data is transferred to the
host.
The difference of Read Sector(s) command and Read Verify Sector(s) command is whether the data is
transferred to the host or not.
If an uncorrectable error occurs, the read verify will be terminated at the failing sector.
Output Parameters To The Device
Sector Count
The number of continuous sectors to be verified. If zero is specified, then 256 sectors
will be verified.
LBA Low
The sector number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 0 - 7. (L=1)
LBA High/Mid
The cylinder number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 8 - 15 (Mid), 16 - 23 (High). (L=1)
H
The head number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 24 - 27. (L=1)
R
The retry bit, but this bit is ignored.
Input Parameters From The Device
Sector Count
The number of requested sectors not verified. This will be zero, unless an unrecoverable
error occurs.
LBA Low
The sector number of the last transferred sector. (L=0)
In LBA mode, this register contains current LBA bits 0 - 7. (L=1)
LBA High/Mid
The cylinder number of the last transferred sector. (L=0)
In LBA mode, this register contains current LBA bits 8 - 15 (Mid), 16 - 23 (High).
(L=1)
H
The head number of the last transferred sector. (L=0)
In LBA mode, this register contains current LBA bits 24 - 27. (L=1)