Filter
Top Products
Travelstar 5K160 (SATA) Hard Disk Drive Specification
67/167
13.2 Data Out Commands
These commands are:
Device Configuration Set
Format Track
Security Disable Password
Security Erase Unit
Security Set Password
Security Unlock
Set Max Set Password
Set Max Unlock
S.M.A.R.T Write Log Sector
Write Buffer
Write Long
Write Multiple
Write Multiple Ext
Write Sector(s)
Write Sector(s) Ext
Execution includes the transfer of one or more 512 byte (>512 bytes on Write Long) sectors of data
from the host to the device.
If the device detects an invalid parameter, then it will abort the command by setting BSY=0, ERR=1,
ABT=1.
If an uncorrectable error occurs, the device will set BSY=0 and ERR=1, store the error status in the
Error Register. The registers will contain the location of the sector in error. The errored location will
be reported with CHS mode or LBA mode. The mode is decided by mode select bit (bit 6) of Device
register on issuing the command.
All data transfers to the device through the Data Register are 16 bits, except for the ECC bytes,
which are 8 bits.
13.3 Non-Data Commands
These commands are:
Check Power Mode
Device Configuration Freeze Lock
Device Configuration Restore
Execute Device Diagnostic
Flush Cache
Flush Cache Ext
Format Unit
Idle
Idle Immediate
Initialize Device Parameters
Read Native Max Address
Read Native Max Address Ext
Read Verify Sector(s)
Read Verify Sector(s) Ext
Recalibrate
Security Erase Prepare
Security Freeze Lock
Seek
Sense Condition
Set Features
Set Max Address
Set Max Address Ext
Set Max Lock
Set Max Freeze Lock
Set Multiple Mode