Filter
Top Products
Chapter 5 Configuring Storage Systems and Logical Paths 5-17
Hitachi Universal Replicator for IBM /OS User’s Guide
Viewing the Status of Logical Paths
The DKC Status window (see Figure 5-6) displays the status of logical path(s).
To view the status of logical path(s), follow the procedure below. Not only the
primary storage system administrator but also the secondary storage system
administrator can perform this operation:
1. Ensure that the DKC Operation window is displayed.
2. In Display, select DKC.
3. Execute a following operation between two ways.
– Click LDKC from the tree. In the upper-right list, click and right-click a
remote storage system.
– Click the remote storage system from the tree. In the upper-right list,
click and right-click a logical path.
4. Select DKC Status from the pop-up menu.
The DKC Status window appears (
Figure 5-6).
– If a remote storage system is selected in the list, the DKC status
window displays all the logical paths between the local and the remote
storage systems and shows the status for each of the paths.
– If a logical path is selected in the list, the DKC status window only
displays the status of the selected logical path.
5. Check the status of the logical path(s), and then select Close to close the
DKC status window.
Figure 5-6 DKC Status Window