Filter
Top Products
5-28 Chapter 5 Configuring Storage Systems and Logical Paths
Hitachi Universal Replicator for IBM /OS User’s Guide
Removing the Relationship Between the Primary and
the Secondary Storage Systems
To remove the relationship between the primary and the secondary storage
systems and then remove all the logical paths between the two storage
systems. both the primary storage system administrator and the secondary
storage system administrator must perform this operation:
1. Make sure that all affected URz volume pairs have been deleted.
2. Ensure that the Storage Navigator main window is in Modify mode.
3. For detailed information about how to do this, please refer to Storage
Navigator User’s Guide.
4. Ensure that the DKC Operation window is displayed.
5. In Display, select DKC.
6. Select LDKC from the tree.
7. The list displays a list of remote storage systems.
8. Select and right-click remote storage system(s) from the list.
9. Select DKC Operation and Delete DKC from the pop-up menu.
10. A confirmation message appears.
11. Select OK to close the message.
12. See the Preview list to check the settings that you have made.
– The Preview list displays the specified remote storage system(s). One
row indicates one remote storage system.
– If you want to cancel removal of the relationship, select and right-click
remote storage system in the Preview list and then select Cancel.
13. Select Apply to remove the relationship.