Filter
Top Products
Chapter 2: Install U Mounting Brackets
Caution:
This device is intended to transmit RF energy. For protection against RF exposure to humans and in accordance
with FCC rules and Industry Canada rules, this transmitter should be installed such that a minimum separation dis-
tance of at least 20 cm (7.8 in.) is maintained between the antenna and the general population. This device is not
to be co-located with other transmitters.
Equipment Needed: Phillips No. 1 screwdriver and a Torque wrench capable of measuring to 50 inch pounds (5.64±.56 N/m).
Note: Torquing tool is not supplied by Honeywell. Bolts, washers, and wrench needed when attaching the bottom mounting
bracket to the vehicle are not supplied by Honeywell.
The U-Bracket system consists of
l U-Bracket for mounting VX6
l UPSBattery mount options:
o
Integrated UPS battery mount
o
Remote mount for UPSbattery
l Available without U-Bracket for vehicles previously equipped with an Honeywell vehicle mounted computer
Before installation begins, verify you have the applicable vehicle mounting bracket assembly components necessary for your
mount type.
2-1