Filter
Top Products
Step 4 - Attach UPS Battery Pack
1. If using a UPS battery pack, the battery pack can be mounted to the bottom mounting bracket. Place a locking washer
and then a flat washer on a 1/4-20x2 bolt. Thread the bolt through the UPS Battery Pack, then through the 1” aluminum
spacer and into the mounting bracket.
2. Connect all cables to the VX7. Secure the cables with the strain relief cable clamps, ensuring a slack loop remains
between the cable clamp and the accessory connector.
3. The vehicle mounted bracket and the VX7 are now ready to use.
2-8