Filter
Top Products
Step 1 - Mount Bottom Mounting Bracket to Vehicle
1. Position the bracket to allow access to the switches and ports on the bottom of the VX6.
2. Attach the bottom mounting bracket to the vehicle mounting surface using a minimum of four 1/4 bolts (or equivalent)
fasteners.
Note: 1/4 bolts and washers not included. It is recommended to use lock washers and flat washers on the fasteners.
IMPORTANT: Mount to the most rigid surface available.
After the bottom bracket has been attached to a rigid surface, you are ready to assemble the VX6 bracket configuration.
Mounting Dimensions
1. 14.40 in / 359.2 mm
2. 12.10 in / 307.3 mm
3. 6.05 in / 153.6 mm
4. 1.02 in / 25.9 mm
5. 3.38 in / 85.85 mm
6. Vehicle Mount
Footprint
7. 0.406 in / 10.312
mm
8. 0.88 in / 22.3 mm
9. 1.25 in / 31.75 mm
U-Bracket Footprint (Not to Scale)
2-5