Filter
Top Products
Parameter Default Function
RX Diversity
On Start on
Main
How to handle antenna diversity when receiving packets from the Access
Point.
Option is: On-start on Main
Note: This parameter cannot be changed for some Summit radios.
Frag Thresh 2346
If the packet size (in bytes) exceeds the specified number of bytes set in the
fragment threshold, the packet is fragmented (sent as several pieces instead
of as one block). Use a low setting in areas where communication is poor or
where there is a great deal of wireless interference.
Options are: Any number between 256 bytes and 2346 bytes.
RTS Thresh 2347
If the packet size exceeds the specified number of bytes set in the Request
to Send (RTS) threshold, an RTS is sent before sending the packet. A low
RTS threshold setting can be useful in areas where many client devices are
associating with the Access Point.
This parameter cannot be changed.
LED Off
The LED on the wireless card is not visible to the user when the wireless
card is installed in a sealed mobile device.
Options are: On, Off.
Tray Icon On
Determines if the Summit icon is displayed in the System tray.
Options are: On, Off
The tray icon is not displayed when the Thor VX8 is running a Windows
Embedded Standard or Windows 7 Professional operating system.
Hide Password On
When On, the Summit Config Utility masks passwords (characters on the
screen are displayed as an *) as they are typed and when they are viewed.
When Off, password characters are not masked.
Options are: On, Off.
Admin Password
SUMMIT
(or Blank)
A string of up to 64 alphanumeric characters that must be entered when the
Admin Login button is tapped. If Hide Password is On, the password is
masked when typed in the Admin Password Entry dialog box. The password
is case sensitive. This value is masked when the Admin is logged out.
Options are: none.
Auth Timeout 8 seconds
Specifies the number of seconds the Summit software waits for an EAP
authentication request to succeed or fail.
If the authentication credentials are stored in the active profile and the
authentication times out, the association fails. No error message or
prompting for corrected credentials is displayed.
If the authentication credentials are not stored in the active profile and the
authentication times out, the user is again prompted to enter the credentials.
Options are: An integer from 3 to 60.
Certs Path certificates
A valid directory path, of up to 64 characters, where WPA Certificate
Authority and User Certificates are stored on the mobile device when not
using the Windows certificates store. Ensure the Windows folder path
currently exists before assigning the path in this parameter. See Certificates
4-18