Filter
Top Products
External Connectors
Most external connectors for the Thor VX8 are located on the bottom of the unit.
l PS/2 connectors for Keyboard and Mouse.
l COM 1 connects to a serial bar code scanner cable.
l COM 2 connects to a serial printer or PC with the appropriate cables.
l The USB connectors are a standard USB type A host connector.
l The Ethernet connector is a standard RJ45 10/100 Ethernet connector.
l The multipurpose connector is a D15 connector that can provide a USB port, D9 serial RS-232 (COM4) port or both
depending on the accessory cable attached to the connector.
l Audio connector is a 3.5 mm jack for audio out, i.e. a headset.
l Microphone connector is a 3.5mm jack for audio in, i.e. a microphone.
l External Bluetooth antenna connector.
Note: Pin 9 of the COM 1 can be switched between +5V and RI to change between a bar code scanner and a serial port
printer or PC cable. See VMT Manager.
Other external connectors are located as follows:
l 802.11 antenna connectors are located on the top of the Thor VX8. One of these connectors may also be used by the
WWAN radio.
2-4