Filter
Top Products
6
After the system verifies your account information, the web-based configuration
utility is displayed.
2.2 Configuring a Dial-up Connection for
Internet Access
The HG630a works in routing mode by default. And the HG630a starts to set up
a dial-up connection automatically after the startup. You can access the
network after you power on your computer. You do not need to install any
special dial-up software on your computer or perform dial-up operations on your
computer.
To configure the HG630a and your computer for the network access, do as
follows:
Step 1
Log in to the HG630a's web-based configuration utility.
Step 2
Click
Setup Wizard
.
Step 3
Click
Next
.
Step 4
In
User name
and
Password
, enter the user name and password that
are provided by your service provider, and then click
Next
.
Step 5
In
SSID
, set a wireless network name, and then click
Next
.
For security reasons or to make the password easy to remember,
you can change the user name and password for the web-based
configuration utility. For
details, see section 4.1 "Changing the User
Name and Password for the Web-Based Configuration Utility".
If the user name and password have been changed, use the correct
user name and password for login.
The default wireless network name and password which are printed
on the label of the HG630a's rear panel are preset before delivery.
They are unique and safe. If you do not want to modify them, click
Next.
For security reasons or to make the password easy to remember,
you can change it. For details, see section 4.3 "Changing the
Wireless Network Name and Password".
If the default wireless network name and password have been
changed, user the new ones.