17
6 FAQs
Can I use the HG630a as a DHCP server?
Yes. The HG630a incorporates the DHCP server software.
How can I quickly restore the default settings of the HG630a?
When the HG630a is powered on, press and hold the Reset button for 6 or
more seconds, and then release it. The HG630a then automatically restarts
and the default settings are restored.
What can I do if I cannot access the HG630a configuration page?
Step 1
Check the IP address of your computer and ensure that this IP
address is in the same network segment as the HG630a LAN IP
address.
Step 2
Ensure that your Web browser does not use a proxy server.
Step 3
Ensure that you have entered the valid user name and password
used to access the HG630a configuration page.
If the problem persists, restore the default settings of the HG630a.
Does the WPS function have any special requirement on the wireless
encryption settings of the HG630a?
The WPS function can be used only when the WLAN security mode is set to
WPA-PSK or WPA2-PSK. It is recommended that you set the security mode
to WPA-PSK/WPA2-PSK.
If my computer fails to connect to a WLAN after I press and hold the WPS
button, what should I do?
Step 1
Ensure that only one computer is connecting to the HG630a
through the WPS function at one time.
Step 2
On the HG630a, ensure that the wireless network function and the
WPS function implemented through the PBC method are enabled.
Step 3
Ensure that the security mode of the WLAN is set to
WPA-PSK
or
WPA2-PSK
. Note that the WPS function of the HG630a is forcibly
disabled if the WEP encryption is used for the WLAN.
Step 4
Check the positions of the HG630a and computer. Ensure that they
are far from electric appliances that generate strong magnetic or
electric fields, such as microwave ovens, refrigerators, and