Filter
Top Products
Configuration Using a Web Browser
4-36
Supplicant Timeout
This feature is to set the time period the switch waits for a supplicant
response to an EAP request.
Server Timeout
This feature is to set the time period the switch waits for a server’s
response to an authentication request.
Max Requests
This feature is to set the number of authentication requests that must
time out before authentication fails and the authentication session ends.
Reauth Period
This feature is to set the time period after which the connected client
devices must be re-authenticated.
After finishing necessary configurations, click on Apply to save the settings.
4-6.19 MAC Address Table
MAC address table can help define the authorization levels for certain devices on the network, and further
secure the network integrity by preventing unauthorized access.
4-6.19.1 Static MAC Address Settings
You can add a static MAC address that remains in the switch's address table regardless of whether the
device is physically connected to the switch. This saves the switch from having to re-learn a device's MAC
address when the disconnected or powered-off device is active on the network again. With this interface, you
can add/modify/delete a static MAC address.
MAC Address
This feature is to assign the MAC address to a certain port so that the
packets destined or undestined to this MAC address will still or will not be
forwarded regardless of the physical location of the device with this MAC
address.
Port No. This feature is to select the port that the MAC address is assigned to.