Filter
Top Products
Command Set Lists
C-2
dhcpserver enable
G
Enable DHCP Server switch(config)#dhcpserver enable
Dhcpserver disable
G
Disable DHCP Server switch(config)#no dhcpserver
dhcpserver lowip
[Low IP]
G
Configure low IP address
for IP pool
switch(config)#dhcpserver lowip
192.168.1.100
dhcpserver highip
[High IP]
G
Configure high IP address
for IP pool
switch(config)#dhcpserver highip
192.168.1.200
dhcpserver subnetmask
[Subnet mask]
G
Configure subnet mask
for DHCP clients
switch(config)#dhcpserver subnetmask
255.255.255.0
dhcpserver gateway
[Gateway]
G
Configure gateway for
DHCP clients
switch(config)#dhcpserver gateway
192.168.1.254
dhcpserver dnsip
[DNS IP]
G
Configure DNS IP for
DHCP clients
switch(config)#dhcpserver dnsip
192.168.1.1
dhcpserver leasetime
[Hours]
G
Configure lease time (in
hour)
switch(config)#dhcpserver leasetime 1
dhcpserver ipbinding
[IP address]
I
Set static IP for DHCP
clients by port
switch(config)#interface fastEthernet 2
switch(config)#dhcpserver ipbinding
192.168.1.1
show dhcpserver
configuration
P
Show configuration of
DHCP server
switch#show dhcpserver configuration
show dhcpserver clients
P
Show client entries of
DHCP server
switch#show dhcpserver clients
show dhcpserver ip-binding
P
Show IP-Binding
information of DHCP
server
switch#show dhcpserver ip-binding
no dhcpserver
G
Disable DHCP server
function
switch(config)#no dhcpserver
security enable
G
Enable IP security
function
switch(config)#security enable
security http
G
Enable IP security of
HTTP server
switch(config)#security http
security telnet
G
Enable IP security of
telnet server
switch(config)#security telnet
security ip
[Index(1..10)] [IP Address]
G
Set the IP security list switch(config)#security ip 1
192.168.1.55
show security
P
Show the information of
IP security
switch#show security
no security
G
Disable IP security
function
switch(config)#no security
no security http
G
Disable IP security of
HTTP server
switch(config)#no security http
no security telnet
G
Disable IP security of
telnet server
switch(config)#no security telnet
C-3 Port Commands Set
Commands Level Description Example
interface fastEthernet
[Portid]
G
Choose the port for
modification.
switch(config)#interface fastEthernet 2