Filter
Top Products
Command Set Lists
C-11
command to change the
NAS ID.
8021x misc quietperiod
[sec.]
G
Use the 802.1x misc quiet
period global
configuration command to
specify the quiet period
value of the switch.
switch(config)# 8021x misc quietperiod
10
8021x misc txperiod
[sec.]
G
Use the 802.1x misc TX
period global
configuration command to
set the TX period.
switch(config)# 8021x misc txperiod 5
8021x misc supptimeout
[sec.]
G
Use the 802.1x misc supp
timeout global
configuration command to
set the supplicant timeout.
switch(config)# 8021x misc
supptimeout 20
8021x misc servertimeout
[sec.]
G
Use the 802.1x misc
server timeout global
configuration command to
set the server timeout.
switch(config)#8021x misc
servertimeout 20
8021x misc maxrequest
[number]
G
Use the 802.1x misc max
request global
configuration command to
set the MAX requests.
switch(config)# 8021x misc
maxrequest 3
8021x misc reauthperiod
[sec.]
G
Use the 802.1x misc
reauth period global
configuration command to
set the reauth period.
switch(config)# 8021x misc
reauthperiod 3000
8021x portstate
[disable | reject | accept |
authorize]
I
Use the 802.1x port state
interface configuration
command to set the state
of the selected port.
switch(config)#interface fastethernet 3
switch(config-if)#8021x portstate
accept
show 8021x
E
Display a summary of the
802.1x properties and
also the port sates.
switch>show 8021x
no 8021x
G
Disable 802.1x function. switch(config)#no 8021x
C-13 TFTP Commands Set
Commands Level Description Defaults Example
backup flash:backup_cfg
G
Save configuration to TFTP
and need to specify the IP of
TFTP server and the file
name of image.
switch(config)#backup
flash:backup_cfg
restore flash:restore_cfg
G
Get configuration from TFTP
server, and specify the IP of
TFTP server and the file
name of image.
switch(config)#restore
flash:restore_cfg
upgrade flash:upgrade_fw
G
Upgrade firmware by TFTP,
and specify the IP of TFTP
server and the file name of
image.
switch(config)#upgrade
flash:upgrade_fw