Filter
Top Products
Command Set Lists
C-12
C-14 SystemLog, SMTP and Event Commands Set
Commands Level Description Example
systemlog ip
[IP address]
G
Set System log server IP
address.
switch(config)# systemlog ip
192.168.1.100
systemlog mode
[client|server|both]
G
Specify the log mode. switch(config)# systemlog mode both
show systemlog
E
Display system log. Switch>show systemlog
show systemlog
P
Show system log client &
server information.
switch#show systemlog
no systemlog
G
Disable systemlog
function.
switch(config)#no systemlog
smtp enable
G
Enable SMTP function. switch(config)#smtp enable
smtp serverip
[IP address]
G
Configure SMTP server
IP.
switch(config)#smtp serverip
192.168.1.5
smtp authentication
G
Enable SMTP
authentication.
switch(config)#smtp authentication
smtp account
[account]
G
Configure authentication
account.
switch(config)#smtp account John
smtp password
[password]
G
Configure authentication
password.
switch(config)#smtp password 1234
smtp rcptemail
[Index] [Email address]
G
Configure Rcpt e-mail
Address.
switch(config)#smtp rcptemail 1
Alert@test.com
show smtp
P
Show the information of
SMTP.
switch#show smtp
no smtp
G
Disable SMTP function. switch(config)#no smtp
event device-cold-start
[Systemlog|SMTP|Both]
G
Set cold start event type. switch(config)#event device-cold-start
both
event authentication-failure
[Systemlog|SMTP|Both]
G
Set Authentication failure
event type.
switch(config)#event
authentication-failure both
event ring-topology-change
[Systemlog|SMTP|Both]
G
Set X-ring topology
changed event type.
switch(config)#event
ring-topology-change both
event systemlog
[Link-UP|Link-Down|Both]
I
Set port event for system
log.
switch(config)#interface fastethernet 3
switch(config-if)#event systemlog both
event smtp
[Link-UP|Link-Down|Both]
I
Set port event for SMTP. switch(config)#interface fastethernet 3
switch(config-if)#event smtp both
show event
P
Show event selection. switch#show event
no event device-cold-start
G
Disable cold start event
type.
switch(config)#no event
device-cold-start
no event
authentication-failure
G
Disable Authentication
failure event type.
Switch(config)#no event
authentication-failure
no event
ring-topology-change
G
Disable X-ring topology
changed event type.
switch(config)#no event
ring-topology-change
no event systemlog
I
Disable port event for
system log.
switch(config)#interface fastethernet 3
switch(config-if)#no event systemlog
no event smpt
I
Disable port event for
SMTP.
switch(config)#interface fastethernet 3
switch(config-if)#no event smtp
show systemlog
P
Show system log client &
server information.
switch#show systemlog