Filter
Top Products
Step 8. Attaching the faceplates
This option package includes two faceplates that conform to the curved design of
certain computers. If your computer has a curved design, you can attach one of the
included faceplates so that the front of the CD-RW drive matches the exterior cabinet.
Choose the faceplate that best fits your computer, and attach it after you have mounted
the CD-RW drive in the appropriate bay.
Note: Depending on the exterior design of your computer, you may need to attach
the faceplate before placing the cover back on your computer.
Step 9. Updating your computer configuration
After you have completed the hardware installation, restart your computer. Usually,
the configuration-setup information screen is displayed. If this screen is not displayed,
check your computer documentation for information about accessing the configuration
or setup utility program.
To see the configuration information for most IBM computers, press F1 during startup.
When you have finished reviewing the information, save the changes and exit.
Note: Some older computers with one IDE port might not display the CD-RW
drive information when you review the configuration-setup information. You still
can use the CD-RW drive in this situation if you have properly completed the
installation.
Step 10. Installing the (optional) DOS device driver
Note: This device driver is not necessary to use the CD-RW drive with most
operating systems. It is only necessary if you plan to use the CD-RW drive as a
CD-ROM drive with DOS, or you need to access the CD-RW drive using a DOS
prompt. Be sure to see the READ.ME file on the Option Diskette for the latest
information about the software on the Option Diskette.
The IBM Option Diskette contains device drivers that allow you to access the CD-RW
drive from a DOS prompt.
To install the IBM Option Diskette device drivers for Windows 98, Windows 95,
Windows 3.x, OS/2 or DOS:
1. Insert the IBM Option Diskette into the diskette drive.
2. Type A:CDSETUP in a command line and press Enter.
3. Click Setup.
4. Follow the on-screen instructions to install the software.
5. Click Exit after software installation completes.
6. Restart your computer so the new settings take effect.
Part 1: Installation and usage guide 1-23