Filter
Top Products
v The device driver files loaded successfully.
v The device manager (System control panel applet) reports that the device is
working correctly.
v The adapter LEDs indicate normal operation: Green ON, Amber OFF.
If you experience problems, see “Chapter 4. Problem solving” on page 37.
Installing the driver when Windows 95 OSR2 is already installed
1. When you boot Windows 95, it will detect the new hardware and display the
Update Device Driver Wizard dialog which displays the following message:
This wizard will complete the
installation of: PCI Token Ring Controller.
Insert the adapter CD-ROM or the NDIS Drivers diskette containing the device
drivers into the appropriate drive.
2. When prompted, enter the path to the driver directory and select OK.
Note: Some of the files on the diskette are located in the DOS subdirectory. If
necessary, you will have to supply this subdirectory to get additional files
copied onto your computer.
3. At this point, Windows 95 might prompt you for network names. Type your
computer’s name and workgroup. Consult your system administrator if you do
not know this information. Select OK to continue.
4. The driver files will be copied at this point. Windows might prompt you for the
Windows 95 CD-ROM in order to install its default network protocols and
services. Make sure that the location of your Windows 95 installation files (for
example, d:\ or d:\win95 or c:\windows\catroot) appears in the entry and select
OK. You might also be prompted again for the location of the driver files. Enter
the appropriate location again as described previously.
After the files have been copied, a dialog box displays the following message:
To finish setting up your new hardware, you must
restart the computer. Do you want to restart your computer now?
5. Remove the driver diskette or CD-ROM from the computer and select Yes.
6. Check for the following conditions to determine whether the adapter is working
correctly and whether installation has been completed successfully:
v The device driver files loaded successfully.
v The Device Manager (System control panel applet) reports that the device is
working correctly.
v The adapter LEDs indicate normal operation: Green ON, Amber OFF.
If you experience problems, see “Chapter 4. Problem solving” on page 37.
Installing the driver for a first-time Windows 95 installation
If Windows 95 is being installed on a computer with the adapter already installed,
Windows 95 will detect the adapter, but will not install any drivers. Use the following
procedure to correct the problem.
1. Insert the NDIS Drivers diskette or the CD-ROM into the appropriate drive.
2. Select Start → Settings → Control Panel. This will display the Control Panel.
3. In the Control Panel window, double-click the System icon.
4. Select the Device Manager tab.
26 IBM 16/4 Token-Ring PCI Management Adapter