IBM 16/4 Token-Ring Network Card User Manual


 
Anmerkung: Um die Einhaltung des EMVG sicherzustellen sind die Geräte, wie in
den IBM Handbüchern angegeben, zu installieren und zu betreiben.
Japanese Voluntary Control Council for Interference (VCCI) Statement
This is a Class A product based on the standard of the Voluntary Control Council for
Interference by Information Technology Equipment (VCCI). If this equipment is used
in a domestic environment, radio disturbance may arise. When such trouble occurs,
the user may be required to take corrective actions.
Taiwanese Class A Warning Statement
Power Cord Notices for UTP Media
When using the adapter in a Class B environment with UTP cable media, you must
use a shielded power cord to attach your PC to the AC outlet in order to be Class B
compliant.
Shielded power cords used in the United States and Canada are listed by
Underwriters Laboratories (UL) and certified by the Canadian Standards Association
(CSA). Always purchase a shielded power cord with the UL or CSA rating located
on the packaging or power cord itself. These shielded power cords are readily
available at your local electronic distributors. IBM makes the shielded power cord
PN 6952304 available through your IBM Marketing Representative for use at 115
volts in the United States and Canada. If purchasing other than the IBM PN, use a
UL-listed or CSA-certified shielded power cord consisting of a minimum 18 AWG,
type SVT or SJT, three-conductor line cord, a maximum of 15 feet in length, and a
NEMA WD-1 5-15P type attachment plug rated at 15 amperes, 125 volts.
For PCs intended to be operated at 230 volts in the United States and Canada, use
IBM shielded line cord PN 1838578, available through your IBM Marketing
Representative or purchase a UL-listed or CSA-certified line cord consisting of a
minimum 18 AWG, type SVT or SJT, three-conductor cord, a maximum or 15 feet in
length, and a NEMA WD-1 6-15P type attachment plug rated at 15 amperes, 250
volts.
Appendix G. Notices 89