A-2 High-Rate Wireless LAN PC Card User’s Guide
Networking characteristics
Radio characteristics
Radio characteristics may vary according to:
• The country where the product was purchased
• The type of product that was purchased
Wireless communication is often subject to local radio regulations. Although High-Rate
Wireless LAN wireless networking products have been designed for operation in the
license-free 2.4 GHz band, local radio regulations might impose a number of limitations to
the use of wireless communication equipment.
Note: Refer to the flyer included in yourt option package for country-specific regulatory
information.
To comply with such regulations, High-Rate Wireless LAN PC Cards are marketed with
dedicated channel-sets, with a number of factory-programmed channels identified by the
following acronyms:
• ETS: For countries that adhere to the regulations as defined by the European
Telecommunications Standards Institute (ETSI).
• FCC: For countries that adhere to the regulations as defined by the US Federal
Communications Commission (FCC).
• FR: For France
• JP: For Japan
The acronym of the channel-set supported by your card is printed on a label on the back-
side of your High-Rate Wireless LAN PC Card.
Compatibility IEEE 802.11 Standard for Wirelesss LANs
(DSSS)
Network operating
system
Microsoft Windows
Host operating system Windows 95: NDIS3 Miniport driver
Windows NT 4.0: NDIS4 Miniport driver
Windows 98 and Windows 2000: NDIS5
Miniport driver
Media access protocol CSMA/CA (collision avoidance) with
acknowledgement (ACK)
Data rate
(High-Rate Wireless
LAN PC Cards use an
automatic Transmit Rate
Select mechanism)
High: 11 MBps
Medium: 5.5 MBps
Low: 1 MBps