Filter
Top Products
Chapter 2. Installing Netcool/Precision TN 21
3. Wait for the installation to complete. A confirmation message appears at the end.
On completion, the installation adds files to your system, as described in
"Netcool/Precision TN directory structure" on page 28. You can view the installation
log file, as described in "Viewing the installation log" on page 21.
Before attempting to run Netcool/Precision for Transmission Networks, you must set up
the Oracle database. See "Setting up an Oracle database" on page 22.
Viewing the installation log
The Netcool Installer generates an installation log file of actions performed during the
installation. You can use this file to verify that you installed Netcool/Precision for
Transmission Networks successfully or to troubleshoot your installation. The level of detail
in the log file is set by using the -errorlevel command line parameter when running the
installation program.
The installation log is stored in the following location:
$NCHOME/log/install/ncisetup.log
You can view the installation log at any time using the Netcool Installer Maintenance
Wizard in GUI mode or in console mode.
To view the installation log using the Netcool Installer Maintenance Wizard in GUI mode:
1. From a command prompt, enter the following command:
$NCHOME/install/ncisetup
The Welcome page of the Netcool Installer Maintenance Wizard appears.
2. Select the Installer Log option and click Next to continue. The Installer Log page
appears with the list of actions performed by the Netcool Installer.
3. After reviewing the log, click Cancel to exit the Netcool Installer Maintenance Wizard.
-errorlevel Defines the level of detail in the error messages written to the Netcool
Installer log. This parameter is optional, and omitting it defaults the log
file level to warning messages only.
The ERRORLEVEL variable in the -errorlevel parameter takes one
of three values:
debug - Detailed logging for debug purposes
info - Logs warning and informational messages
warning - Logs warning messages only
Table 2. Netcool Installer command line parameters (2 of 2)
Parameter Description