IBM 5.5 Webcam User Manual


 
Netcool/Precision for Transmission Networks 5.5 Administration Guide64
Note: The name attributes are case sensitive and must be input exactly as they appear
in Table A1 on page 65.
Sample: - Properties in the precisiontn.xml file
The following example shows the property definition section in the precisiontn.xml
file:
<extension-assembly>
....
<properties name="TopoMediatorExtension">
<property name="lumos.leapx.service.topo.mediator.UseCLLICodes"
value="true"/>
</properties>
<properties name="LEAPFramework">
<property name="lumos.leap.association.InitialReconnectDelay" value="1"
/>
<property name="lumos.leap.association.MaxReconnectDelay" value="4096" />
<property name="lumos.leap.association.ReconnectIncrement" value="100" />
<property name="lumos.leap.association.MaxReconnectAttempt" value="-1" />
</properties>
<properties name="LEAPFramework">
<property name="lumos.leap.KAStrict"
value="{TL1PassThru,TL1PassThruNoLogin}" />
</properties>
<!--
<properties name="Netcool TSM">
<property name="PropsFile" value="$(app.install.root)config/tl1.props"
/>
</properties>
<properties name="Netcool TL1 Connect">
<property name="hostsPath" value="$(app.install.root)/config/" />
</properties>
<properties name="Netcool User Authentication">
<property name="jdbcuser" value="root" />
<property name="jdbcpwd" value="" />
</properties>
-->
<properties name="LEAPFramework">
<property name="lumos.leap.adaption.ProtocolTypeManager.MsgLogEnabled"
value="{TL1}" />
</properties>
<properties name="TL1 Northbound">
<property name="lumos.leape.north.tl1.LoginMode" value="NONE"/>
</properties>
Note: The app.install.root property defines <netcool_install_dir>.