Filter
Top Products
v To update BIOS NVRAM defaults, type:
flasutil /U
Press ″Enter.″
v To verify NVRAM in all adapters, type:
flasutil /X
Press ″Enter.″
Using the flasutil BIOS Update Utility menu
Complete the following steps to update the DS4000 FC 4Gbps PCI-X Adapter BIOS
code, using the flasutil BIOS Update Utility menu:
1. CD: Insert the IBM System Storage DS4000 FC 4Gbps PCI-X Host Bus
Adapter Support CD into the CD-ROM drive. Restart the server. Your server
starts to a DOS prompt.
Diskette: Insert the BIOS Update Utility diskette into the diskette drive and
restart the server. Your server starts to a DOS prompt.
2. From the DOS prompt, type:
flasutil
3. Press ″Enter.″
4. If you have only one adapter installed, go to Step 5. If you have more than one
adapter installed, a list of adapters and I/O addresses displays. At the
command prompt, type the appropriate I/O address and press ″Enter.″
5. The following option menu displays.
F = Write Flash
FB = Write MultiFlash image
W = Copy Flash to file: QLxxROM.SAV
S = Display serial number
V = Display current BIOS version
C = Verify Flash
Y = Display port name
L = Write NVRAM
A = Write NVRAM and defaults
D = Copy NVRAM to file: QLxxNVRM.SAV
U = Update BIOS NVRAM defaults
X = Verify NVRAM
Notes:
a. All of the listed options are supported and can be run from the
command-line. Options L, A, D, U, and X might not display.
b. Caution: Do not use the F or FR options to update the FC 4Gbps PCI-X
Adapter BIOS (Flash). The /F option is used for updating the BIOS of the
IBM FC2 or FC2-133 2 Gb Host Bus Adapters, only.
c. Each adapter can be configured with more than one option.
d. Because there is only one BIOS (Flash) area in a dual port FC 4Gbps
PCI-X Adapter, entering option FB for the second port I/O address of a
dual port adapter, will result in command completion with no BIOS status
message displayed.
6. Type the letter for the option you want and press ″Enter.″
7. If you have additional adapters installed, or if you want to configure your
adapter with more than one option, continue with Step 8; otherwise, go to Step
9.
20 IBM System Storage DS4000 FC 4Gbps PCI-X Single/Dual Port HBA: Installation and User’s Guide