Filter
Top Products
Exchange 2003 VSS Backup Solution
For IBM Storage DS8000/DS6000
And Symantec Backup Exec 11d
Page 12 David West, David Hartman
©
Copyright IBM Corp. 2007
Installing the CIM Agent on Windows
This section includes the steps to install the CIM agent in your Windows
environment.
You must satisfy all prerequisites before you begin the CIM agent installation.
After the completion of installation, you must verify the installation of the CIM
agent. Before you install the CIM agent on Windows, verify that your system
meets all of the hardware and software requirements.
1. Log on to your system as the local administrator.
2. Insert the CIM agent CD into the CD-ROM drive. The CIM agent
program should start within 15 - 30 seconds if you have autorun mode
set on your system. If the LaunchPad window does not open, perform
the following steps:
a. Use a Command Prompt or Windows Explorer to change to the
Windows directory on the CD.
b. If you are using a Command Prompt window, type:
LaunchPad
c. If you are using Windows Explorer, double-click on the
LaunchPad.bat file.
Note: If you are viewing the folder in Windows Explorer with
the option selected to hide file extensions for known file types,
find the LaunchPad file with the file type of MS-DOS Batch File.