IBM DS8000 Computer Drive User Manual


 
Exchange 2003 VSS Backup Solution
For IBM Storage DS8000/DS6000
And Symantec Backup Exec 11d
Page 29 David West, David Hartman
©
Copyright IBM Corp. 2007
Error Type 2. CIM agent not correctly configured If any of the following
are true:
You have never used the setdevice tool to define a storage unit to the
CIMOM.
You made an error in the IP address, user name, or password.
You did not restart the CIMOM after adding the ESS/DS.
The following message series is displayed near the end of the output
messages:
Connecting to CIM agent, host=1.11.111.111, port=5989
Found 0 IBMTSESS_StorageSystem instances
CIM agent not correctly configured
You can find more information about the possible cause of this error message
by examining the cimomx.log (where x can be a number from 1–9. For
example, cimom7.log).
If you have a network connection problem or you have set an incorrect IP
address for the ESS using the setdevice tool, the ESS CLI cannot connect to
the ESS. A message pair similar to the following can appear in the log:
2003-10-30 08:37:03,PST-08:00
CIMOM[com.ibm.provider.ess.EssCLICmdHandler.
outputEssCliError(Unknown Source)]: ESSCLI Error
[java.lang.Object{esscli 204: The connection to the specified
server was not established.}]
2003-10-30 08:37:03,PST-08:00 E
CIMOM[com.ibm.provider.ess.EssProvider.initialize (Unknown
Source)]: esscli list server failed for 9.11.111.112, trying
again... [java.lang.Object{Operation Failed. RC=2}]
If you have entered an incorrect user name or password for the ESS using
the setdevice tool, the ESS CLI can connect to the ESS but cannot
authenticate. A message pair similar to the following can appear in the log:
2003-10-30 10:32:53,PST-08:00 E
CIMOM[com.ibm.provider.ess.EssCLICmdHandler.
outputEssCliError(Unknown Source)]: ESSCLI Error
[java.lang.Object{esscli 510: Access was denied by the server.}]
2003-10-30 10:32:53,PST-08:00 E
CIMOM[com.ibm.provider.ess.EssProvider.initialize (Unknown
Source)]: esscli list server failed for 9.11.111.112, trying
again... [java.lang.Object{Operation Failed. RC=5}]