IBM ECS-320A Network Card User Manual


  Open as PDF
of 63
 
SERIAL INTERFACE DEVELOPERS GUIDE
ErrorData [1] Value read back.
ErrorData [2] Test mask.
ErrorData [3] Lower 16 bits of memory address.
ErrorData [4] Upper 16 bits of memory address.
6.6.6 Force ‘1’ Test
This error is set during operational tests.
Data from CameraConfig.camErrors:
ErrorCode: ERR_FORCE_ONE define.
ErrorSubCode: No subcode.
ErrorCount: a count of the total number of errors since boot.
ErrorData [0] Value expected (0x2000).
ErrorData [1] Value read back.
ErrorData [2] Test mask.
ErrorData [3] Lower 16 bits of memory address.
ErrorData [4] Upper 16 bits of memory address.
6.6.7 Force Count Test
This error is set during operational tests.
Data from CameraConfig.camErrors:
ErrorCode: ERR_FORCE_COUNT define.
ErrorSubCode: No subcode.
ErrorCount: a count of the total number of errors since boot.
ErrorData [0] Value expected.
ErrorData [1] Value read back.
ErrorData [2] Test mask.
ErrorData [3] Lower 16 bits of memory address.
ErrorData [4] Upper 16 bits of memory address.
6.6.8 Force Count Coadd Test
This error is set during operational tests.
Data from CameraConfig.camErrors:
ErrorCode: ERR_FORCE_COADD define.
ErrorSubCode: No subcode.
ErrorCount: a count of the total number of errors since boot.
ErrorData [0] Value expected.
ErrorData [1] Value read back.
ErrorData [2] Test mask.
ErrorData [3] Lower 16 bits of memory address.
34
 previous next