Filter
Top Products
| |
| Text......... Installs Release X_________________________ |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| F3=Exit F12=Cancel |
| |
+————————————————————————————————————————+
The Change Profile Details display contains the following information:
v Installation profile
This field is an output-only field. The system automatically displays the installation profile name
(INSTALLX in the example) you created or chose on the Work with Installation Profiles display.
v Type of install
This input field specifies the type of installation you want. The number of the installation option you
choose is used to prompt you for the displays required to complete this task. It is also used to provide
appropriate defaults for those prompts.
If option 1 (Replace current release with new release) is selected, a new release is installed on the
system.
Take Note!
Do not select this option if you are performing a CISC to RISC upgrade. Instead, see the AS/400 Road Map for
Changing to PowerPC Technology, SA41-5150 book for information about upgrading to PowerPC Technology.
When you select option 2 (Install new AS/400), the target system must already have the current level of
the Licensed Internal Code installed.
If option 3 (Change primary language using media containing secondary language) is selected, be
aware of the following:
– The target site system must already have the current level of the Licensed Internal Code, the
OS/400 licensed program, and all of the appropriate licensed programs for the target system
installed.
– A separate copy of the media containing the secondary language must be distributed to the target
site system.
– Do not select any licensed program from the Saved Licensed Programs display when creating your
distribution media.
– Option 3 cannot be used to install additional licensed programs at the target site system using the
automatic installation method.
v Text
This is an input field. You can enter any descriptive information about the installation profile (up to 50
characters).
Change OS/400 Installing Options Display
If you select option 1 (Replace current release with new release), the version of the Change OS/400
Installing Options display shown is similar to the one below. The same is true if option 2 (Install new
AS/400) is selected for the Type of install prompt on the Change Profile Details display.
36 iSeries: Using central site distribution to install multiple iSeries servers