Filter
Top Products
Model (Model Number) Comes Standard with This...
CO8I0030
Duplex (02D)
Dual top stacker
Two front 250-sheet input trays
One front 2000-sheet input tray
Common Highlights
The following are available on all models of the 3130:
Advanced function common control unit (AFCCU) with 24 MB of storage. You
can order additional memory in 16 MB increments up to 56MB maximum.
Floppy disk drive
Hard disk drive with resident fonts installed
PC Parallel connector
An Ethernet connector for one of the following optional Ethernet Transmission
Control Protocol/Internet Protocol (TCP/IP) and/or NetWare (SPX/IPX)
interfaces:
– 10BaseT (twisted pair)
– 10Base2 (thin)
– 10Base5 (thick)
An additional interface slot for one of the following optional attachments:
– Twinaxial direct attachment
– Synchronous Data Link Control (SDLC) V.24 or V.35 with System Network
Architecture (SNA)
– Token Ring with SNA, TCP/IP, NetWare (SPX/IPX), or all three.
The ability to process IPDS, PostScript and PCL-5e data streams.
Optional Features
Table 1 on page 4 summarizes the optional features available for both models of
the 3130. For details about obtaining these features, contact your marketing
representative.
Chapter 1. Introduction to the 3130 Advanced Function Printer 3