Filter
Top Products
Chapter 6. Ordering and Storing Supplies
Chapter Overview
This chapter describes how to order and store the supplies that the 3130 uses.
Printer Supplies
Table 9 lists printer supplies, parts, the part numbers you can use to order them,
and an estimate of how often they need to be replaced. The yields listed in the
table are approximations. They are not a warranty or guarantee of minimum life,
and are provided only to assist in supplies planning. Analyze your actual usage
figures to determine how much of each supply item to stock.
Actual supply life varies according to printer usage, toner settings, paper
characteristics, temperature, and humidity. In addition, special applications (such
as, adhesive labels, extensive graphics, bar codes, landscape applications, and
pre-printed forms) may significantly reduce supply life.
When the 3130 runs low on a particular supply, it displays a message on the
operator panel.
Table 9. Printer Supplies and Parts
Supply Item Part Number Replace Every...
Cleaner unit 1372476 300 000 to 500 000 pages (job
stream dependent)
Developer mix 1402691 600 000 pages
Fuser unit 100V: 1372475
200V: 1372478
600 000 impressions
600 000 impressions
Photoconductor belt 1372472 50 000 to 100 000 counts
Toner cartridge
(package of six
cartridges)
1402690 35 000 pages
Transfer belt unit 1372477 600 000 pages
Ordering Supplies
To order supplies for the 3130 in the United States, use any of the following
methods:
Contact a Lexmark International Incorporated authorized supply dealer.
Call Lexmark Telemarketing at 1-800-438-2468 from 8 a.m. to 8 p.m. Eastern
Standard Time.
Write Lexmark Telemarketing at:
Lexmark Telemarketing
1221 Alverser Drive
Midlothian, Virginia 23113
Copyright IBM Corp. 1994, 1996 29