Filter
Top Products
“Step 6—Configuring TCP/IP Host Table Entries” on page 18. For information
about configuring and using a DNS server, see
DNS(http://publib.boulder.ibm.com/pubs/html/as400/v5r1/ic2924/info/rzakk/
rzakkkickoff.htm) in the Information Center. If you are using the Supplemental
Manuals CD, then switch to the iSeries Information Center CD to access this
information.
5. Obtain X.25 network addresses: If you plan to use TCP/IP on an X.25 private
or public data network, you need to know whether you will be using a
switched virtual circuit (SVC) or permanent virtual circuit (PVC).
v To use an SVC, you need to know the network address of each remote
system in the network with which you want to communicate.
v To use a PVC, you need to know the related logical channel identifier. You
can have a network address or a permanent virtual circuit, but not both, for
a remote system information entry.
If a remote system is an iSeries, you can determine its network address by
using the Display Line Description (DSPLIND) command on that remote
system.
6. Familiarize yourself with the TCP/IP Administration Menu: The TCP/IP
Administration menu (Figure 1 on page 6) provides easy access to common
functions associated with administering TCP/IP.
To get to this menu, enter the GO TCPADM command from the iSeries Main
Menu.
7. Familiarize yourself with the Configure TCP/IP Menu: The Configure TCP/IP
menu (Figure 2 on page 8) guides you through all the tasks for configuring
your server to communicate with other systems in a TCP/IP network.
You can reach this menu in two ways:
v Select option 1 on the TCPADM menu.
v Enter the Configure TCP/IP (CFGTCP) command.
TCP/IP Planning Checklists
The following checklists (Table 1 and Table 2 on page 4) can help you prepare for
the installation and configuration of TCP/IP on your network
v Line description parameters
v Local TCP/IP host information
Line Description Parameters Checklist
Table 1. Line Description Parameters
Line Type *ELAN *TRLAN *WLS *DDI *FR *X25 *ASYNC *PPP *TDLC
Resource name R R R R R R R
Local adapter address O O O O
Speed O OOOO O O
SSAP (session services
access point)
O O OOO
Maximumframesize O O OOOO O O
Local manager mode O
Attached non-switched
NWI name
R
Data link connection ID R
Chapter 1. Configuring TCP/IP 3