Filter
Top Products
To view detailed information about a specific route, type 5 in the option field next
to the route and press the Enter key.
Routes listed on the Display TCP/IP Route Information display differ from the
routes that are displayed on the Work with TCP/IP Routes display. Only routes
with a route source of *CFG and a route type that is not *DIRECT can be changed
with the Work with TCP/IP Routes display. Similarly, only routes that meet these
conditions can be changed or removed with the CHGTCPRTE or RMVTCPRTE
commands. *CFG means the route was added using iSeries configuration
commands or is a *DIRECT route. *DIRECT means that the route is to a network
or subnetwork to which this system has a direct physical connection. This route is
not defined with an add route command.
Work with TCP/IP Connection Status
The Work with TCP/IP Connection Status display allows you to display or end a
TCP/IP connection between a local system and a remote system.
To display the Work with TCP/IP Connection Status display:
1. Type 3 on the command line of the Work with TCP/IP Network Status menu
or enter the WRKTCPSTS *CNN command.
2. Press the Enter key.
The first of the three Work with TCP/IP Connection Status displays, as shown in
Figure 29 on page 39.
To display the second and third Work with TCP/IP Connection Status displays,
press F11 (see Figure 30 on page 39 and Figure 31 on page 40). To display port
numbers instead of port service names, press F14.
In Figure 29 on page 39, the connections indicate that the FTP server, SMTP server,
and TELNET server are active and ready to receive connection attempts. Because
no connection has been established yet, the Remote Address and Remote Port fields
Display TCP/IP Route Information
System: SYSNAM04
Type options, press Enter.
5=Display details
Route Type of Route Route Route
Opt Destination Service MTU Type Source
9.125.87.0 *MAXTHRPUT 1989 *DIRECT *CFG
9.125.87.0 *NORMAL 1989 *DIRECT *CFG
9.125.109.3 *MINDELAY 576 *HOST *ICMP
127.0.0.0 *NORMAL 576 *DIRECT *CFG
*DFTROUTE *MAXTHRPUT 1989 *DFTROUTE *CFG
*DFTROUTE *NORMAL 1989 *DFTROUTE *CFG
Bottom
F3=Exit F5=Refresh F6=Print list F11=Display next hop F12=Cancel
F13=Sort by column F17=Top F18=Bottom
Figure 28. Display TCP/IP Route Information, Display 2 of 2
38 OS/400 TCP/IP Configuration and Reference V5R1