Menu: Tools Heater-specific diagnosis
20
2.8. Menu: Tools
NOTE
If the diagnostic adapter is connected to the USB port, it will be auto-
matically recognised by Windows. No settings are required.
The Tools menu provides you with two menu commands to configure
your computer.
2.8.1. COM port
• Open the COM port selection dialog box using menu command
Tools/COM port.
• Select the COM port (COM1 or COM2) you want to use to connect to
the external device.
• Click the <OK> button to confirm your selection.
CAUTION
If the COM port you wish to use is not displayed, this means that the port
is being used by a different program. In this case quit all your
applications and restart Thermo Test.
2.8.2. Startup
Select menu command Tools/Startup if you wish to restart the connec-
tion to the control unit automatically after an interrupt. This is an advan-
tage if the operating voltage is disconnected frequently during the test.
The selection will be confirmed by a tick being placed next to the Startup
menu command.
If you reselect the menu command or terminate the connection, this
selection will be cancelled.
101493_PCTe_gb.book Seite 20 Donnerstag, 16. Juni 2005 11:47 11