Filter
Top Products
- 5 -
Chapter 3 Configure through Web Browser
Web configuration provides a user-friendly graphical user interface (web pages) to manage your
WRT-410. A WRT-410 with an assigned IP address will allows you to monitor and configure via web
browser (e.g., MS Internet Explorer or Netscape).
1. Open your web browser.
2. Enter the IP address of your WRT-410 in the address field (default IP address is http://192.168.1.1).
3. A User Name and Password dialog box will appear. Please enter your User Name and Password here.
Default User Name and Password are both “admin”. Click “OK”.
4. Then you will see the WRT-410 web configuration page.
5. When the first time you enter WRT-410, Setup Wizard will pop up. Please refer to our Quick
Installation Guide to use the Setup Wizard to configure. Setup Wizard will guide you through
configuration step by step.
3.1 Main
3.1.1 LAN & DHCP Server
You can configure WRT-410’s IP settings and DHCP server function in this screen. When
configuration is completed, please click “Apply” to save and restart WRT-410.